Operational excellence software is the system an organization uses to run continuous improvement at scale. It collects improvement ideas from employees, routes each one to a decision, tracks the work and records the verified result, so the program can show what it delivered and repeat what worked at other sites.
Most buyers choose it for the first wave: a handful of expert-led projects, each with a sponsor and a deadline. This guide is about the second wave, which starts when those projects close and the gains have to come from hundreds of smaller changes that nobody is assigned to chase. That is the wave most operational excellence programs lose.
Why Do Operational Excellence Programs Lose Momentum?
Because the first wave runs on projects, and nothing replaces them when they close. McKinsey reported in 2024 that, in a 2022 survey, only 12 percent of transformation programs held their gains for more than three years. LNS Research puts the share of operational excellence initiatives that lose momentum before they are embedded in normal operations at about three quarters.
The two waves ask different things of the people involved, and so of the software that supports them:
| Question | First wave | Second wave |
|---|---|---|
| Who does the work? | Trained specialists and project teams | Anyone who sees a problem in their own job |
| What is the unit of work? | A project with a charter | A small change, often a few days‘ work |
| Who decides? | A steering group, on a schedule | The manager who owns the process, within days |
| How is the result proven? | A close-out report | A saving checked against a baseline |
| What happens next? | The project ends | The improvement is offered to the next site |
GE Aerospace shows what a strong first wave produces. Since launching its FLIGHT DECK lean operating model in 2024, the company reports that staff from all seven sites of its On Wing Support network met for one kaizen event to redesign a turbine refresh procedure, and LEAP engine output across the network grew by more than 60 percent over the following year.
At its Celma repair shop in Brazil, turnaround on the CFM56 fan cell line fell from 68 days in 2023 to 46. Results like these come with a team and a deadline attached. The test for the software comes afterwards, when the next hundred improvements arrive with neither.
What Should Operational Excellence Software Do After the First Wave?
It should keep improvement moving when no project team is attached to it. In the second wave the ideas come from people whose main job is something else, so every step that depends on a specialist chasing it becomes a place where good ideas stall. The software’s job is to take those steps out of the critical path.
In practice that comes down to five jobs:
- Capture from everyone. A frontline employee can submit an improvement in a couple of minutes, from wherever they work, without learning the program’s vocabulary first.
- Route to a named decision-maker. Each idea lands with the person who owns the process or the budget, with a deadline, and the submitter can see where it is.
- Verify the result. Savings and time gains are recorded against a baseline and confirmed by whoever keeps the numbers before they count.
- Replicate across sites. An improvement proven in one place is offered to every site with the same problem, and adoption is tracked rather than assumed.
- Report realized impact. Leaders see what has been delivered, kept separate from what has merely been proposed.
Washington State’s Productivity Board, which runs the state’s employee suggestion program, moved that program onto software in April 2026, launching an online portal that gives suggesters, evaluators, coordinators and staff one place to manage the work. Its 2026 report to the legislature counts 173 applications since January 2024, 22 adopted and $12,768,576 in documented savings. Roughly one application in eight was adopted, which makes the decision step the place where value is won or lost.
How Does Operational Excellence Software Prove Impact?
By recording each result against a baseline, at the time the change is made, where finance can check it. A program that cannot show verified results is asking its sponsor to take its value on trust. In Qmarkets‘ Impact Gap 2026 benchmark of 60 organizations, 45 percent of executive-sponsored programs could not measure their own impact.
The same benchmark also found:
- Sixty-nine percent of organizations lacked real-time reporting and analytics.
- Only 24 percent were strong at every step from ideation to measurement.
- Where innovation infrastructure was mature, measurement maturity was 55 percent higher.
The figures describe innovation programs as a whole rather than operational excellence alone, but the failure has the same shape: the activity gets recorded and the outcome does not. The last finding argues for treating measurement as a software requirement from day one.
Three habits help. Set the baseline before the change rather than after it, so a saving cannot grow in the retelling. Give every result one named owner. Then route the number through whoever keeps the books before it is reported, which is the mechanism our cost reduction program article sets out in detail. The Impact Tracking & Benefits Realization blueprint covers forecast-versus-actual measurement across a whole portfolio.
What Does a Program That Lasts Look Like in Practice?
It looks like the Veterans Health Administration’s Diffusion of Excellence program, which finds practices that frontline staff have already proven and spreads them to other sites of care. An evaluation published in February 2024 counted 1,440 documented adoptions across the VHA, and 56 percent of the facilities that first replicated those practices were still running them up to six years later.
The starting point was practices that had already worked at one local site. The VHA set up an internal competition, its Shark Tank, to find them and then support replication at new locations. In the first eight rounds, from 2016 to 2022, staff submitted 3,280 applications. Eighty-eight became designated promising practices, which meant another facility received structured help to adopt them.
The evaluation in Frontiers in Health Services found that about half of the facilities replicating a practice did so successfully in six to nine months. Of the 1,440 adoptions, 180 were in rural facilities, and 56 of the 88 practices were still being actively spread. Where practices lapsed, the evaluators named the causes: the practice was folded into other initiatives or workflows, the technology changed, organizational priorities moved, or the staff behind it took new roles.
Two Lessons for Any Operational Excellence Program
First, replication is where the value multiplies, since 88 practices became 1,440 adoptions. Second, sustainment is a separate job from launch: close to half of the first adopters did not keep their practice going.
Software that records an improvement once and never checks on it again cannot see that loss happening. Plan for it from the start: give each adopted practice an owner at the adopting site and a date to confirm it is still running.
How Do You Compare Operational Excellence Platforms?
Compare them on what happens to an idea 90 days after it is submitted. Any vendor can show a submission form and a dashboard in a demo. The day-90 view is harder to stage, which is exactly what makes it useful: it shows whether the platform keeps work moving once nobody is watching it closely.
Five requests separate operational excellence platforms quickly:
- Show me an idea a frontline employee submitted 90 days ago. Ask where it is now, who decided it and how long each step took.
- Show me where a verified saving is recorded. Ask who confirmed it and against which baseline. An estimate typed into a free-text field is not a verified result.
- Show me an improvement spreading from one site to others. Ask to see adoption by site, including the sites that stopped.
- Show me what happens when an evaluator leaves. Ideas should move with the role rather than sit in a departed person’s queue.
- Show me the report a CFO would see. Delivered results should sit apart from forecasts, and lapsed improvements should still be visible.
Where you can, run these requests on a reference customer’s live instance rather than a demo environment, with that customer’s permission. Live data shows the queues and the gaps that a prepared dataset hides. If you are still building the shortlist, our guide to choosing continuous improvement software covers scalability, integrations, security and how to validate a vendor before you sign.
Which Operational Excellence Tools Does Software Replace?
None of the methods. Kaizen events, PDCA cycles, A3 problem solving and value stream mapping are still done by people, on the floor or in a room together. What software replaces is the spreadsheets and email chains that hold the results, so the next team can find them and build on them.
A PDCA cycle ends with a finding. The platform’s job is to keep that finding, with its result attached, where the next site can find and reuse it. Judging every improvement by the result it produced, rather than by the activity around it, is the core of an impact-driven approach to innovation, and it applies to operational excellence tools as much as to new products.
Keep the Methods Your Teams Already Use
Judging by results is also a reason to be wary of a platform that imposes its own improvement method: teams that already run PDCA or A3 need somewhere to record the result, and gain little from learning a new process.
Q-optimize is built for the second wave. Employees submit improvements through a structured intake, including from Microsoft Teams, and each suggestion goes to the expert best placed to assess it. Approved improvements move through defined stages with named owners, and their results are tracked against costs over time. Practices that prove themselves are promoted for adoption across teams and business units. To see how it would handle your own program, explore Q-optimize, our continuous improvement software.
Operational Excellence Software: Common Questions Answered
GE Aerospace’s FLIGHT DECK lean operating model is one: at its Celma repair shop in Brazil, turnaround on the CFM56 fan cell line fell from 68 days in 2023 to 46. The Veterans Health Administration’s Diffusion of Excellence program is another, with 1,440 documented adoptions of frontline practices across its facilities.
It depends on the job. Enterprise resource planning and manufacturing execution systems run day-to-day operations. Operational excellence software runs improvement: it captures ideas, routes decisions, tracks implementation and records verified results. Most large organizations need both, connected so that improvement work can draw on operational data.
OpEx tools are the methods used to find and fix problems in how work gets done, such as kaizen events, PDCA cycles, A3 problem solving, value stream mapping, 5S and root cause analysis. Software does not replace them. It records what each one produced, so the result can be verified and reused elsewhere.
It is the system that runs continuous improvement once there are too many ideas to manage by spreadsheet. It takes in suggestions from employees, sends each to the person who decides it, tracks implementation and records verified savings, so the program can prove its results and copy what worked to other sites.
The two labels overlap, and vendors often use them for the same products. Continuous improvement software usually describes the tools for capturing and tracking improvements. Operational excellence software tends to be the label when the program also covers standard work, performance tracking and verified results across many sites.
Compare verified results with the program’s full cost, including software licenses and the time people spend on it. Count only savings confirmed against a baseline, and report forecasts separately, so the ratio cannot be inflated by ideas that have not landed yet. Recheck adopted improvements later, because some will lapse.